Nio — Event Data Recorder (EDR)

Instrument and Central Control System Event Data Recorder (EDR) This vehicle is equipped with an Event Data Recorder. The Event Data Recorder is mainly used to record data from certain crashes or crash-like situations, such as airbag deployment or collision with an obstacle on the road. Such data can help understand the operation of vehicle systems. The Event Data Recorder on this vehicle can temporarily or permanently store technical information about the vehicle status, events, and faults. This technical information usually includes the status of the following components, modules, systems, and environments:

• Statuses of the vehicle and its individual components, such as the speed, acceleration, and vehicle identification number. • Functional statuses of important system components, such as seatbelt buckles. • Vehicle responses under special driving conditions, such as airbag deployment or stability control system intervention. • Data for a period of time before and after a collision, such as braking, acceleration, steering operation, time of occurrence, occupant protection device deployment and seat belt status. Such data helps better understand how collisions and injuries occur. Note: The vehicle speeds recorded by the Event Data Recorder are from the brake control unit.

This data is only a natural attribute for identifying and fixing faults and optimizing vehicle features. It cannot be used to reproduce movements on the road. When performing servicing related tasks such as repair and maintenance, service personnel and manufacturers can read this technical data from the memory of events and fault data with special diagnostic devices. After troubleshooting, the system deletes or continues to overwrite the information in the memory storage.

When using the vehicle, these technical parameters and other information related to the vehicle, such as accident records, vehicle damage, and evidence (which may require the intervention of a specialist), can be read through the diagnostic devices at NIO. If the Event Data Recorder does not have enough space to record an event, the current event data will overwrite unlocked previous event data in chronological order. Locked events will not be overwritten by subsequent events. 164