Driving Experience Basic Operation Starting the vehicle The vehicle can get ready to drive when the following conditions are met: 1. The driver is seated. 2. Close the driver's side door or press the brake pedal. The driver can start the vehicle in many ways such as with the smart key, NFC card, and mobile phone NFC. If the mobile phone NFC or NFC card is used, place the mobile phone with the NFC key or NFC card on the wireless charging board, keep the mobile phone unlocked and fit it into the wireless charging board, and then try to engage the gear and start the vehicle.
Caution When starting the vehicle via an NFC card, ensure that your phone or NFC card is placed on the wireless charging pad. Caution When using an NFC card, ensure that your phone is turned on and remains unlocked. Since Apple Inc. does not allow third parties to access NFC, iOS is not supported at present. Caution In case of a collision, the impact force is transmitted to the driver’s lower leg through the accelerator pedal, causing personal injury. Therefore, the accelerator pedal has a fracture limiter groove to protect the driver’s legs and personal safety.
In unexpected situations where a great lateral external force is applied to the vehicle, the accelerator pedal may break due to the limiter groove design. Gear shift After pressing the brake pedal and toggling the gear shifter into the D or R gear, the digital instrument panel displays , indicating that power output is ready. After the shift, the digital instrument panel will display the real-time gear position 168