Vehicle Safety Assist • The status icon and one side of the central lane marking are yellow: Only occurs when Alert and Lane Correction is selected. It indicates that the Lane Keeping Assist (LKA) is providing a certain Steer Assist to correct lanes at the corresponding side to reduce the possibility of the vehicle deviating from the lane. Caution The dynamic environment simulation display can only be used as a reference and cannot perfectly reflect the real traffic conditions. Therefore, do not rely on the dynamic environment simulation display.
Precautions and Restrictions The following situations may prevent the Lane Keeping Assist (LKA) system from operating as expected or cause it to automatically exit, which include but are not limited to: • Pass through bends with excessive curvature, such as high-speed ramps.
• The lane markings are not clear, worn, missing, interweaving, or shaded by other vehicles or buildings or scenery • Passing through road sections without lane markings, such as non-standard roads, intersections and construction areas • Passing through road sections with special lane markings, such as speed reduction markings and channelizing-line markings • Passing through areas with unclear lane division, such as areas with merging or dividing lane markings, high-speed ramp crossings, urban intersection zones and left turn waiting zones • There are edges or other high-contrast lines on roads instead of lane markings, such as pavement joints and curbs • Lane markings cannot be recognized or are not recognized correctly due to height change, such as on the uphill and downhill 230