Vehicle Safety Assist Front Cross Traffic Alert When driving at low speeds, if the system detects a potential collision risk with the rear crossing vehicle, the Front Cross Traffic Alert (FCTA) function can warn the driver to be careful through visual and auditory alerts. Warning Cross Traffic Alert is only a supplement to, and not a substitute for, your visual observation. As a driver assist feature, Cross Traffic Alert cannot handle all situations in all traffic, weather and road conditions. You must always pay attention to traffic and road conditions, and decide to use Cross Traffic Alert or not after your safety is ensured.
It is always your responsibility to ensure that the vehicle is driven in a safe manner and complies with applicable traffic laws and regulations. Enable/Disable the Front Cross Traffic Alert (FCTA) Go to the Settings page from the control bar at the bottom of the central display, and tap NIO Pilot >Front Cross Traffic Alert (FCTA) to enable or disable this function. When the operating conditions are satisfied, if a potential collision risk with the front crossing vehicle is detected, it will remind you through visual and auditory alerts on the dynamic environment simulation display, 360 Surround View page and Automatic Parking page.
Operating conditions for the Front Cross Traffic Alert (FCTA) 257