Vehicle Safety Assist Enable/Disable the Rear Cross Traffic Alert with Braking (RCTA-B) Go to the Settings page from the control bar at the bottom of the central display, and tap NIO Pilot >Rear Cross Traffic Alert with Braking (RCTA-B) to enable or disable this function. When it is enabled, you can select the assisting level in the Rear Cross Traffic Alert with Braking (RCTA-B) Settings: • Alert only:
when the vehicle speed is less than about 15km/h and the operating conditions are satisfied, if a potential collision risk with rear crossing vehicles from behind is detected, it will remind the vehicle in the rear through visual and auditory alerts on the digital instrument panel, 360 Surround View page and Automatic Parking page. • Alert and brake actively: when the vehicle speed is about 1-15km/h and the operating conditions are satisfied, besides visual and auditory alerts, the system will warn you by a brief instance of active braking if necessary, but cannot ensure that the vehicle will stop. Operating conditions for the Rear Cross Traffic Alert with Braking (RCTA-B):
• The speed of the rear crossing vehicle is between about 5 and 60 km/h. • The rear lateral millimeter wave radar operates normally and has a clear field of view. • Driver seating status • All doors are closed • Your vehicle is in gear position R. Caution When you select Warning & Braking, if you fully press the brake pedal or accelerator pedal, the function may not intervene. 261