NIO Pilot • The Auto Lane Change (ALC) is enabled and operating normally. • The sensor functions properly and the field of view is clear. • The vehicle speed is about 60-130 km/h. • The current and target lanes meet all the safety conditions to change lanes. For example: є The lane marking on the side of the lane change is a dotted line. є The curvatures of the current and target lanes are small. є The vehicle maintains a safe distance between itself and vehicles in front of and behind it in the current and target lanes. є There is no Blind Spot Detection (BSD) and Lane Change Assist (LCA) and other alarms in the target lane. є The lane markings on both sides of the target lane are clear.
• None of the components for the Auto Lane Change (ALC) are faulty and the vehicle meets all safety conditions. For example: є No malfunction with the turning signal є Driver seating status є The driver has fastened his seat belt є All doors are closed є Your vehicle is in gear position D є The driver does not step on the brake pedal є Anti-lock brake system, traction control system and vehicle stability control system are not triggered Enabling the Auto Lane Change (ALC) function in Settings does not mean that the function has been activated.
After meeting the operating conditions, you must perform a visual check to confirm the safety of the lane change environment, and then toggle the turning signal lever on the corresponding side. The system will detect if your hands are on the steering wheel. • The system will activate the Auto Lane Change (ALC) function to assist the lane change if it detects that the conditions to change lanes have been met. At this time, the dynamic environment simulation will display the light band on the corresponding side turning blue and disappearing after a successful 265