NIO Pilot • The lane markings of the current lane and target lane are not clear, worn, missing, crossed, or shaded by other vehicles or buildings or scenery • Passing through road sections without lane markings, such as non-standard roads, intersections and construction areas • Passing through areas with unclear lane division, such as areas with merging or dividing lane markings, high-speed ramp crossings, urban intersection zones and left turn waiting zones • Passing through road sections with special lane markings, such as speed reduction markings and channelizing-line markings • There are edges or other high-contrast lines on roads instead of lane markings, such as pavement joints and curbs • Lane markings cannot be recognized or are not recognized correctly due to height change, such as on the uphill and downhill • Lane markings cannot be recognized or are not recognized correctly due to light, such as reflection of lane markings caused by strong light, poor visibility or insufficient light caused by bad weather and or at night • The distance between the lane markings on both sides of the current lane or the target lane is too wide or too narrow The following situations may lead to a camera recognition disorder, thus making it impossible to complete the lane change assistance, which include but are not limited to:
• Changed installation position of camera • Blocked or dirty camera • Limited recognition at night • Dark surroundings, such as at dawn, dusk, night, in tunnels • Sudden changes in ambient brightness, such as tunnel entrances or exits • Large shadows cast by buildings, landscapes or large vehicles • Camera directly exposed to light • Severe weather such as rain, snow, fog, haze • Exhaust gas, water spray, snow or dust lifted up by the vehicle ahead that falls onto your vehicle • Water, dust, micro-scratches, oil sludge, dirt, wiper, ice, snow, etc. on the windshield in front of the camera • Wet roads 268