Nio — Lane Centering Control (LCC)

NIO Pilot Caution When Lane Centering Control is functioning properly: • If Active Lane Change (ALC) is enabled in Settings and the required conditions are met, the vehicle will change lanes automatically when you toggle the turn signal lever. For more details, please refer to "Active Lane Change (ALC)" in the User Manual. • If Active Lane Change (ALC) is not enabled in Settings, toggling the turn signal lever will put Steering Assist on standby, which requires you to take over the steering promptly. During this time, Adaptive Cruise Control will remain on and continue searching for lane lines. When the required conditions are met, Steering Assist will resume automatically.

Caution When Steering Assist functions properly and Active Lane Change (ALC) is not enabled in Settings, please take over the steering and exit Steering Assist if you need to change lanes. Warning Steering Assist may fail to operate as intended in certain situations or disengage to standby while providing sound and text alerts to remind you to take over steering. During this time, Adaptive Cruise Control will remain on and continue searching for lane lines. When the required conditions are met, Steering Assist will resume automatically. including but not limited to: • The vehicle is navigating sharp curves, such as on expressway ramps.

• Lane lines are unclear, worn, missing, overlapping, or obscured by shadows cast by other vehicles, buildings, or landscape features. • The road section has no lane lines, such as non-standard roads, intersections, or construction areas. • The road section has special lane lines, such as deceleration lines or diversion lines. • Lane lines are not clearly divided, such as lane lines merging or diverting, expressway ramps, urban intersections, left-turn waiting areas, etc. • There are edges or other high-contrast lines on the road instead of lane lines, such as road joints or curbs. 279