Doors and Windows Caution After the driver's easy entry function is enabled, if you sit down in the driver seat and close the driver door (or press the brake pedal), the driver side seat, steering wheel and outside rear view mirror will be automatically set to the driving position set in the driver seat memory page of the central display.
Easy entry for the front passenger When the vehicle is stationary and put in Park, and when you open the front passenger door, the front passenger seat will automatically move to the default position (where the seat cushion and the angle of the backrest are in a relatively rearward location, and the leg support automatically moves to the lowest position) to provide the front passenger with an easy exit and entry. You can turn this feature on/off on the central display: enter the Settings page from the control bar at the bottom of the central display, and tap Position Adjustment>Front Passenger Seat>Easy Entry. There are two settings for easy entry: • Exit only:
by unfastening the seat belt or opening the front passenger door (which can be set up on the central display), the seat will automatically move to the default position; while the passenger gets in the vehicle and closes the front passenger door, the seat will not change and will remain in the position it was in when the passenger got out the last time. • Exit + entry: by unfastening the seat belt or opening the front passenger door, the seat will automatically move to the default position; when the passenger gets in the vehicle and closes the front passenger door, the seat will automatically move to the usual position set under the corresponding 26