Nio — Power Station Automatic Parking (PSAP)

NIO Pilot Tap the "Assist in Parking Into the Power Swap Station" button. When you see "Please release the brake and steering wheel", follow the instructions to start parking in the Power Swap Station. • Parking will be suspended if obstacles are detected during the process. • If parking is suspended due to systemic reasons or active intervention during the process, please confirm that there are no obstacles in the surrounding area and manually resume the parking. If you are unable to continue parking, you can select "Terminate Parking", and the on-site specialist will manually swap power for the vehicle after you quit.

If the Power Swap Station is unattended, users can choose to park automatically or manually again, or contact the specialist. After parking is completed, swap power for the vehicle as instructed on the page. Caution Before or during parking into the power swap station, please always pay attention to your surroundings to confirm that there are no passing vehicles, pedestrians, children, etc. and ensure parking safety. Please do not take over the accelerator pedal, unbuckle the seat belt, leave the driver’s seat, or open the door during parking into the power swap station. Start/end the power swap.

After parking successfully in place, it will automatically enter the one-button Power Swap process. Please read the instructions on the vehicle's screen carefully and tap to start the power swap. The vehicle will automatically adjust to the power swap status, and switch off the screen to start the power swap. Warning If your vehicle is not parked in place or failed to be automatically adjusted, please adjust your vehicle as instructed by the field specialist. The windows or air conditioning cannot be adjusted during the power swap. Please adjust them to proper positions in advance.

During the power swap, it is normal that the vehicle jerks slightly with some noise and some warning lights are on temporarily. 323