Nio — Powertrain Information

General Vehicle Information 1. High Voltage DC Integration 2. Emergency HV cut-off plug 3. Airbag 4. Side air curtain cylinder 5. Structural reinforcement 6. Side air curtain 7. Charging port 8. Drive motor 9. Air conditioner HV electric heater 10. High voltage battery 11. Rear power distribution unit 12. 12 V battery 13. Airbag control unit 14. Air-conditioning compressor 15. Seat belt pre-tensioner High voltage battery The vehicle is equipped with a 350 V lithium-ion high voltage battery. Be careful not to damage the high voltage battery when lifting the vehicle from below. Take extra care not to break the battery's bottom plate when using rescue tools.

Warning • Before servicing, removing and installing high voltage components, be sure to power off the vehicle and confirm that the emergency power-off switch and 12V power supply are disconnected. After the vehicle is powered off, let it sit for more than 5 minutes. • No personnel without corresponding qualifications shall operate high voltage components. Operators must wear protective equipment such as insulating gloves that meet related requirements, and must not carry any metal objects.

Drive motor The electric drive system is responsible for the power output of the vehicle, which can convert the DC energy of the high voltage battery pack into mechanical torque in a controllable way, and transmit it to the wheels to drive the vehicle. In addition, in the braking state, the electric drive system can also regenerate braking 382