Nio — Tire Change

Tire Information Tire Change When the vehicle is subject to a severe air leakage that cannot be repaired urgently with the tire sealant, park the vehicle on a flat and solid road and put it in Park, stay away from busy and congested roads, then put on your reflective vest and place the warning triangle, turn on the hazard warning lights, then contact NIO Service Center for a tire change. Warning • When replacing tires, you need to choose new tires with the same specifications as the original tires. Tires with inconsistent specifications may affect the maneuverability of your vehicle and cause your vehicle to lose control.

• When jacking your vehicle for tire replacement, please ensure that nobody enters the area under the jacked vehicle. Otherwise, injury may occur as a result. • If anyone is in your vehicle, please do not jack your vehicle. • Lift your vehicle only at the prescribed underbody jacking point. • When jacking your vehicle, please do not place any objects on or under the jack. • Never jack your vehicle on an uphill, downhill or sloping road. • The jack is only suitable for jacking your vehicle for tire replacement. How to change the tire: 1. Have a jack and a spare tire of the right size ready for the tire change. 2.

Place a block in front of the tire diagonally to the flat tire to prevent the vehicle from sliding. 3. Use the bolt cover remover in the vehicle kit to remove the bolt covers, and loosen the bolts counterclockwise with the wheel wrench 400