Tire Information 6. Remove the wheel bolts and change the tire. When installing the wheel, make sure the bolts are aligned with the mounting holes, and that the metal side of the wheel is properly activated with the mounting surface. 7. After installing the wheel bolts, lower the vehicle completely to the ground (using the jack), then use a wrench to tighten all the bolts clockwise, and then use a torque wrench to tighten the vehicle bolts to the specified torque value. 8. Check the tire pressure after the tire is changed, inflate to the specified tire pressure if necessary, then install the tire valve cap. 9. Put the tools, jack, and the flat tires away in a secure manner. 402