Owner Emergency Information 3. Connect the other end of the red cable to the positive (+) pole of the 12 V battery of the supplying vehicle B. 4. Connect one end of the black cable to the negative (-) terminal of the 12 V battery of the supplying vehicle B. 5. Connect the other end of the black cable to the good ground point on the 12 V battery of the depleted vehicle A. 6. Start the supplying vehicle, wait a few minutes and then start the depleted vehicle. See if the depleted vehicle A can be started normally. 7. Disconnect jumper cables in the reverse order of how they were connected, and put them away. 411