Rescue Service 3. Press the brake pedal while the vehicle is in the Park gear, go to the settings page from the control bar at the bottom of the central display, tap Driving>Towing/Vehicle Washing Mode, then the vehicle will be released from the parking brake and can be towed (if the vehicle is at risk of slipping, use the brake stops). 4. Power the vehicle off before towing, turn on the hazard warning lights, make sure that there is no one in the vehicle and lock the entire vehicle. 5. Install the tow chain on the tow hook and slowly tow the vehicle onto the flatbed. 6. After the vehicle is towed to the designated location on the flatbed, use brake stops and wheel straps to fix the tires.
7. Before having the vehicle transported on a flatbed, exit the Towing/Vehicle Washing Mode on the central display to prevent the vehicle from being damaged due to bumps during transportation. Caution • The vehicle can only be towed from the site when there are no safety risks in doing so. If the high voltage battery is deformed, leaking or emitting smoke, address the risk posed by the high voltage battery first. • Try restarting the 12V battery if Tow/Wash Mode cannot be turned on normally. If the park brake cannot be released, use a tow dolly or a trailer to transport the vehicle a short distance.
• Do not slam on the brake pedal or accelerator pedal when exiting Tow/Wash Mode on the center display. 421