System Messages - Alphabetical List *[Fatal] System clock dead* (None) Explanation: During initial startup, eV+ has failed to detect proper operation of the system clock and timer hardware. eV+ cannot run without the clock operating properly. User action: Power down the controller and try starting it again. If the problem persists, contact Omron Adept Customer Service. *[Fatal] System clock too fast* (None) Explanation: During initial startup, eV+ has detected that the system hardware clock is running too fast. eV+ cannot run without the clock operating properly. User action: Power down the controller and try starting it again. If the problem persists, contact Omron Adept Customer Service.
*[Fatal] Uninit Trap* at aaaaaa m:n (None) Explanation: An internal problem has occurred with the eV+ software or with the system hardware. User action: It would be appreciated if you would report the error to Omron Adept Application Engineering. Please include the details of the error message and exactly what you were doing at the time the error occurred. To save programs that are in memory, you can restart eV+ temporarily by pressing Ctrl+G. The robot servos do not function, but you can STORE the programs. Then power down the controller and restart the system. *[Fatal] ZDIV Trap* at aaaaaa m:n (None) Explanation:
An internal problem has occurred with the eV+ software or with the system hardware. User action: It would be appreciated if you would report the error to Omron Adept Application Engineering. Please include the details of the error message and exactly what you were doing at the time the error occurred. To save programs that are in memory, you can restart eV+ temporarily by pressing Ctrl+G. The robot servos do not function, but you can STORE the programs. Then power down the controller and restart the system. *File already exists* (-500) Explanation: There is already a disk file or a graphics window with the name supplied to the last storage request. User action:
Reissue the storage request with a different file name, or delete the old file. eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 609