System Messages - Alphabetical List FDIRECTORY command to display the directory containing the subdirectory. Make sure that the default directory path is correct. *No other program referenced* (-353) Explanation: A command was issued that attempted to reference a previously edited program, but no other program has been edited during the current editing session. User action: Use the New or GoTo function-key command (or the N keyboard command) to change to a new program. *No program specified* (-301) Explanation: No program was specified for an EXECUTE or SEE command or instruction, or DEBUG command, and no previous program is available as a default. User action:
Type the line again, providing a program name. *No robot connected to system* (-622) Explanation: An attempt has been made to attach a robot with a system that does not support control of a robot. (Note that some commands, instructions, and functions implicitly attach the robot.) User action: Make sure the system has been booted from the correct system disk (for example, use the ID command to display the system identification). Change the program so that it does not attempt to attach the robot. *Not a directory* (-567) Explanation: The caller specified a nondirectory in a directory operation. User action: Specify a directory in the operation, or use the correct nondirectory operation.
*Not attached to logical unit* (-516) Explanation: A program has attempted to perform I/O to a logical unit that it has not attached with an ATTACH instruction. Logical unit 4 allows output without being attached, but all other logical units require attachment for both input and output. User action: Edit the program to make sure it attaches a logical unit before attempting to use it to perform I/O. *Not configured as accessed* (-544) Explanation: An attempt has been made to access a serial line or other I/O device in a manner for which it is not configured. For example, a Kermit or network line cannot be accessed as a simple serial line.
eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 631