MIL-HDBK-304C TABLE III. Container Development Procedure. (16) 2 Downloaded from https://www.everyspec.com Step 1 Define the Shipping, Handling, and Storage Environments The shipping, handling and storage environments must be determined. With this information, the Preservation and Packing Levels are determined. They may be either be Military Packing Level A or Level B. (Section 4) Step 2 Determine Item Characteristics Determine dimensions, weight, fragility rating, number of items to be shipped, and any other special considerations. (Sections 5 and 9) Step 3 Product Redesign The weakest elements of the item may be modified to improve its durability.
This can usually be done inexpensively if done during the item's design process. After redesign the item characteristics in Step 1 are recalculated. Step 4 Design Cushioning System Choosing the proper cushioning material and designing its configuration requires a knowledge of both item characteristics (Step 2) and drop height determined from the Packing Level in Step 1 and the weight from Step 2. (Sections 4, 6 and 7) Step 5 Design the Package System The inner size of the container is determined from the size of the item plus its cushioning. The container can be made of a variety of materials. The package designer chooses the one that fits best with the Packing Level determined in Step 1.
Step 6 Test the Package System The prototype container is then subjected to shock and vibration tests. Test levels are derived from the Packing Level determination in Step 1. (Section 8)