Downloaded from https://www.everyspec.com MIL-HDBK-304C Measurements were made at various locations on the trailer floor. The plotted data represents a composite of sixteen different road conditions traversed at speeds varying from 10 to 60 mph (16 to 97 kph). The probability curves indicate the percentage probability that the amplitude of a recorded vibration input will be below the envelop of the curve. Vibration measurements (vertical direction) made on the floor of an air-ride trailer van ( 14 ) are presented in Figure 4-5. Acceleration levels are expressed in G's.
One conclusion drawn from the study which produced this data was that the amplitudes measured on the van floor rarely exceed one G peak. 15