N/A (no manufacturer mentioned) N/A — MIL-HDBK-304C Package Cushioning Design Handbook PDF Download

MIL-HDBK-304C The described light projection method for determining effective bearing area of items is suitable when the cushioning material is to be applied by complete encapsulation, but it is unsuitable for application by corner pads and side pads. These application techniques are discussed in Section 6.0. 5.4.2 Effects of variable temperature, altitude and humidity upon peak acceleration-static stress curves. The compression characteristics of different kinds of cushioning material when exposed to high humidity or temperature extremes are highly variable.

Consequently, if packages containing cushioning material are expected to be exposed to temperature extremes, high altitude or high humidity during shipment or storage, the packaging designer must recognize the danger in designing by data that indicate material performance only at moderate atmospheric conditions. It is very important that the package designer must test each design at the extreme temperatures which the package may encounter. Table VI shows the minimum “Safe Temperatures” for the different types of foam cushioning material.

Until more complete knowledge about the low temperature performance characteristics of all kinds of materials is gained, it is recommended that the designer use cushioning materials according to the minimum "safe" temperatures listed (8, 22) . TABLE VI Foam Minimum "Safe Temperatures" Probable Minimum Material "Safe" Temperature Urethane foam (polyester type) -10°F (-23°C) Urethane foam (polyether type) -20°F (-29°C) Expanded polystyrene -20°F (-29°C) Polyethylene below -60°F (-51°C) 5.5 Vibration Isolation of the Cushioning System.

Generally shock isolation is considered first in the design of packaging for items of a size and weight which are susceptible to free fall drop during manual handling. After an acceptable pack has been designed with regard to shock protection it should then be evaluated with respect to its vibration response and isolation characteristics. 5.5.1 Vibration Isolation Considerations. Package vibration problems usually involve the following considerations: 1.) The response of the pack "as a whole" to its vibration environment. 2.) The response of secondary elements of the item to the vibration environment.

3.) Determine the vibration characteristics of commonly used cushion materials 4.) Design and test the package system that will properly attenuate vibration input at product critical frequencies. 5.5.2 Vibration Background. Although principal emphasis in package cushioning design is placed upon achieving protection of items from shock, the cushioning system must also protect items from vibration received during shipment. Steady state vibration inputs at relatively low fragility levels can cause damage if their frequencies match or approach natural frequencies of secondary elements or components of the item.

In a situation such as this, the resultant resonant conditions can amplify component acceleration and displacements to the failure level. 26 Downloaded from https://www.everyspec.com