N/A (no manufacturer mentioned) N/A — MIL-HDBK-304C Package Cushioning Design Handbook PDF Download

MIL-HDBK-304C a different static stress and then check the transmissibility factor again. In all cases, it is very important to perform actual vibration tests of packaging configurations, as the theoretical calculations can only estimate actual performance. Once the static loadings which appear to provide adequate shock and vibration protection have been identified, material and thickness selections can be made. The actual static loading which is chosen for the package is dependent upon several factors, however designing at the highest possible static loading means using less material.

When other considerations such as compressive creep are important, designing at the lowest possible static loading may be warranted. 6.3 Cushioning Application Techniques. Selection of the most advantageous cushioning application techniques for any particular problem requires consideration of various factors. Especially the nature of the item and the cost related to each technique. Hopefully, this chapter not only provides examples of usable application techniques, but also inspires other creative design solutions. 6.3.1 Common Application Techniques. 6.3.1.1 Complete Encapsulation. In complete encapsulation, the designer covers the entire surface of the item with cushioning material.

There are two primary encapsulation techniques. These are cushion wraps (wrap item in cushioning) and cushion pads (cover container interior with 6 precut pads) (Figure 6-5A). Note: When you use pads, leave approximately 1/8 inch clearance between each pad. This prevents binding. 6.3.1.2 Corner Pads. Properly designed corner pads (Figure 6-5B) effectively protect items with square corners (or irregularly shaped items within an interior container). 43 Downloaded fr om https://www.everyspec.com