N/A (no manufacturer mentioned) N/A — MIL-HDBK-304C Package Cushioning Design Handbook PDF Download

MIL-HDBK-304C LISTING OF FIGURES Figure Page Section 4 4-1 Some Shock-producing Shipping Practices. 11 4-2A Shock Pulse Types. 12 4-2B Basic Parameters of a Shock Pulse. 12 4-3 Frequency Spectra, Railroad, Vertical Direction, Composite of Various Conditions. 15 4-4 Frequency Spectra, Tractor - Semi-loaded Vertical Direction, Composite of Various Road Types and Road Speeds. 15 4-5 Frequency Spectra, Tractor - Trailer Van Air-ride Suspension, Vertical Direction. 16 4-6 Aircraft Acceleration Envelope Composite (Propeller, Helicopter, Jet). 16 4-7 Frequency Spectra, C-130 Aircraft Takeoff, Vertical Direction.

17 4-8 Ship Acceleration Envelope - Composites 17 Section 5 5-1 Amplification factors for linear damped system. 18 5-2 Damage Boundary Curve 20 5-3 Idealized Mechanical System Representing a Falling Package that Contains a Cushioned Item. 23 5-4 Acceleration-time pulse showing shock wave effects. 24 5-5 A Typical Set of Peak Acceleration-Static Stress Curves 25 5-6 Idealized item-cushioning system bearing on a vibrating foundation. 25 5-7 Force-displacement curves for various types of cushions. 27 5-8 Sample Transmissibility Curve for Polyurethane Foam (Ether). 28 5-9 Effects of damping on the transmissibility curve for the viscous-damped linear cushioning system depicted in Figure 5-6.

30 5-10 Static compressive stress-strain curve for a hypothetical cushioning material. 31 5-11 Vibration Transmissibility Test Setup 31 5-12 Amplification / Attenuation Curve and Transmissibility at 3.0 PSI 32 5-13 Effects of looseness on a package. 35 Section 6 6-1 A Typical Set of Peak-Acceleration / Static Stress Curves 39 6-2 Corner pads according to the problem. 40 6-3 Columnar buckling of cushion. 42 6-4 Sample Transmissibility Curve for Polyurethane Foam (Ether). 43 6-5 Common Cushioning Application Techniques. A , Complete Encapsulation, B , Corner Pads 44 6-6 Load Spreaders used to increase the bearing area of an item against cushions.

44 6-7 Convoluted material used to decrease bearing area. 45 6-8 Cushioning of an item with projections. 45 6-9 Use of precut pad to float an irregularly shaped item. 46 6-10 Use of molded pads. 46 6-11 Use of folded die-cut corrugated fiberboard to immobilize item. 47 6-12 Use of molded or cut rigid material to immobilize item. 47 6-13 Use of corrugated fiberboard blocking to immobilize items. 48 6-14 Use of corrugated fiberboard blocking and wood anchoring base to immobilize item. 48 6-15 Use of a combination of materials to immobilize and cushion item. 49 6-16 Nesting items in cushioning material. 50 6-17 A cushioned base. 51 vii Downloaded from https://www.everyspec.com