Downloaded from https://www.everyspec.com MIL-HDBK-704-3 TABLE TAC201-II. Test conditions for transfer interrupt.
72 Test Condition Steady State Voltage Duration of Interrupt A Nominal Voltage 50 msec B NLSS Voltage 50 msec C NHSS Voltage 50 msec D Nominal Voltage 30 msec E NLSS Voltage 30 msec F NHSS Voltage 30 msec G Nominal Voltage 10 msec H NLSS Voltage 10 msec I NHSS Voltage 10 msec J Nominal Voltage 50 msec (repeated 3 times, separated by 0.5 sec ) K Nominal Voltage 50 msec (followed by a normal voltage transient of 160 Vrms for 30 msec and return to steady state voltage in 40 msec) L Nominal Voltage 50 msec (followed by a normal voltage transient of 70 Vrms for 30 msec and return to steady state voltage in 40 msec)