everyspec.com hydraulic manual — Chapter 8 - Flow Control Units

Downloaded from https://www.everyspec.com FM 1-509 Single-Action (Single-Port) Actuating Cylinder. This cylinder causes movement in one direction only. The operation of this type of cylinder is controlled by a three-way control valve. In the single-action cylinder, fluid under pressure enters the port at the left and pushes against the face of the piston, forcing the piston to the right. (See Figure 8-33.) As the piston moves, air is forced out of the spring chamber through the vent, and the spring is compressed. When pressure on the fluid is released to a point less than the force in the compressed spring, the spring pushes the piston toward the left.

As the piston moves to the left, fluid is forced out of the fluid port and air enters the spring chamber through the vent. Double-Action (Two-Port) Actuating Cylinder. This cylinder causes movement in two directions. The operation of this type of cylinder is usually controlled by a four-way control valve. Placing the control valve in the ON position admits fluid pressure to the left-hand chamber of the actuating cylinder, forcing the piston to the right. (See Figure 8-34.) As the piston moves to the right, it pushes return fluid out of the right-hand chamber and through the control valve to the reservoir. 8-21