Downloaded from https://www.everyspec.com MIL-HDBK-310 5.3.1.7.2 Frequency of Occurrence. Wind speeds (1-percent values) at actual (geometric) and pressure altitudes follow: The 5-, 10-, and 20-percent values are given in Table XXIII (page 92). 5.3.1.8 Wind Shear. The wind shears in this section are applicable to a layer thickness of 1 km (3281 ft) centered at a specified altitude. Wind shears for thinner layers cannot be obtained by linear interpolation as shear increases exponentially with decreasing thickness. Since shear is the change in a velocity through a specific thickness the units are per time period. 5.3.1.8.1 Highest Recorded.
One-km (3281-ft) layer wind shears at actual (geometric) and pressure altitudes follow:
(Continued on next page) 40 ALTITUDE GEOMETRIC PRESSURE ALTITUDE ALTITUDE (km) (kft) (m/s) (Ft/s) (m/s) (Ft/s) 0 1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 35 40 45 50 55 60 65 70 75 80 0 3.28 6.56 13.1 19.7 26.2 32.8 39.4 45.9 52.5 59.1 65.6 72.2 78.7 85.3 91.9 98.4 115 131 148 164 180 197 213 230 246 262 22 43 45 53 73 87 100 110 93 74 73 76 84 88 94 102 121 150 200 210 213 213 180 169 165 145 145 73 141 148 174 240 285 328 361 305 243 240 249 276 289 308 335 397 492 656 689 699 699 591 554 541 476 476 - 37 45 50 66 83 100 110 92 72 70 73 78 87 93 96 102 - - - - - - - - - - - 121 148 164 217 272 328 361 302 236 230 240 256 285 305 315 335 - - - - - - - - - - ALTITUDE GEOMETRIC PRESSURE ALTITUDE ALTITUDE (kft) (km) (sec-1) (sec-1) 0 3.28 6.56 13.1 19.7 0 1 2 4 6 - 0.042 0.032 0.045 0.049 - 0.042 0.034 0.044 0.049