NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 4.2.1.4.3.3 The z component of the magnetic field of a Z dipole. The z component of the magnetic field measured at point (x,y,z) produced by a Z dipole is as follows. 4.2.2 Large current loops. 4.2.2.1 General. Most of the current loops that we need to consider in stray field work are small compared to the distance at which it is desired to compute the stray magnetic field. In such cases. the small loop or dipole formulas can be used; however, the dipole formulas give highly incorrect values for large loops.

Although it is seldom necessary to compute the magnetic field produced by a large loop, formulas for large rectangular current loops are given below to cover the rare case when it is necessary to compute the field that they produce. Note that the formulas are for large rectangular loops only, and do not hold for large loops of other shapes. It is assumed in both cases (large and small loops) that no magnetic materials are nearby. The large current loop formulas give correct values for the magnetic field at points both close to and far from the loop.

The small current loop formulas give a good approximation to the correct values for points that are far from the loop, and a poor approximation to the correct values at points that are close to the loop. This is illustrated in the example of 4.1.2. Note that in the formulas that follow the permeability of free space 4R are left out and that the magnetic field is measured in microtesla. This is because (pO) and the factor of 10-7 tesla is equal to 0.1 microtesla. PO divided by 4X is 10-7 and 4.2.2.2 Horizontal rectangular loop.

Consider a horizontal rectangular loop consisting of N-number of turns with its center at the origin of a rectangular coordinate system having the horizontal x and y axes parallel to the sides of the rectangular loop, as shown on figure 21. Let I be the current, in amperes; 2a and 2b the dimensions of the loop parallel to the x and y axes, respectively, in meters; and (x,y,z) the coordinates, in meters, of the point at which it is desired to measure the magnetic field (note that here a and b do not follow the notation of 4.1.5). The three components of the magnetic field, BZ, at point (x,y,z), in microtesla, are as follows: BX, BY, and 29