Downloaded from https://www.everyspec.com MIL-HDBK-1001/l G ,);, vandal-resistant, and must address energy efficiency, proper security as well as require low maintenance. Lighting controls should seasonal changes , and variable levels required for the likelihood of changing needs 3.5.2 Site Furniture. Site furniture such as benches , kiosks, or information boards should be integral parts of the project and not treated as individual decorative elements Furniture should be durable, and should require infrequent maintenance and relate in color, texture, and form to the building design, established base character, and BEAP criteria. 3.5.3 Siznage.
Site and exterior building signage should be consistent and compatible with base characteristics and BSAP guidelines. Where no such guidelines exist, signage should be simple, clear, and bold and should relate to the building and its context. Refer to NFGS-1044O, SJgIIS, for additional criteria. 3.6 HandicaD ped Access. Consider handicapped access in the initial stages of site planning, except in those instances where it can be documented that handicapped access is not required the facility. Generally, handicapped access is not required when the facility’s intended use is specifically restricted to able-bodied military personnel.
When required, access shall conform to Federal Standard FED-STD -795, Uniform Federal Accessibility Standards (UFAS) 3.7 Protection of the Environment. Consider protection of the environment during and after site design and construction. Building location should minimize demolition or potential damage to existing trees or established grading and drainage systems Measures should be implemented to prevent destruction or contamination of air, water, or other natural resources Refer to NFGS-01560, Environmental Protection. 3.8 Snow Melting. Snow melting by mechanical piping or electric cable is generally discouraged, except when required for severe climates.
If electric cable is used, install with a topping slab set on subslab. Consult the appropriate EFD points of contact for specific policy on snow melting requirements . 3.9 ~. Provide sufficient parking to meet operational requirements and program needs. Specific guidance on determining counts and technical criteria is provided in MIL-HDBK-1190. 3.10 Security. Site security criteria concerning features such as fencing, intrusion detection, and guardposts are contained in MIL-HDBK- 1013/1, Desirn Guidelines for Phvsical Security of Fixed Land-Based Facilities ; DM-13. 02, Commercial Intrusion Detection Svstems; and the criteria manual series on Civil Engineering. I 6 G