NAVFACENGCOM MIL-HDBK-1001/l — NAVFACENGCOM MIL-HDBK-1001/l: Руководство по архитектурным требованиям и принципам проектирования

Downloaded from https://www.everyspec.com MIL-HDBK-1001/l a 5.6 Metric System. Projects in certain locations may be required co be completed in or with metric (s1) equivalents. Comply with the requirements of NAVFACINST 4120.10, Use of the Metric System of Measure&ent in the Acquisition of Facilities and Related Eauipment. Also refer to ASTM E380, Standard Practice for Use of the International Svstem of Units (S1) (the Modernized Metric Svsteml; ASTM E621, Standard Practice for the Use of Metric (S1) Units in Buildine Desire and Construction; and American National Metric Council (ANMC) Publication 90-1, &tric Editorial Guide. 5.7 Slanting.

The design of increasing the resistance of permanent facilities, materials, and personnel to damage by enemy attack or natural disasters , and to reduce the necessary time for recovery, is called slanting. = These provisions are to be included without appreciable added costs or reduced functional efficiency. NAVFACENGCOM personnel must direct the designer to the degree, if any, that slanting measures are to be included in a specific . project. 5.8 provisions for the Phvsicallv Handicapped. It is the policy of NAVFACENGCOM that every facility be designed to provide for full accessibility and usage by persons temporarily or permanently physically handicapped.

Exceptions to this policy exist when the intended use of a facility is I specifically restricted ~o able-bodied military personnel. This policy applies to both new construction and I existing facilities-. ~he designer must design a facility accessibility unless directed otherwise by NAVFACENGCOM. buildings where elevators are not reauired for functional renovations to for full For two-story purposes, platform for the physically lifts s~ould be considered for accessibility. Provisions handicapped shall comply with FED-STD -795. Requirements for providing accessibility are established in MIL-HDBK-1190. 18 I