3.9. Cleaning the Belt and Removing Ink Film (When Using Pigment Ink) When pigment ink adheres to the belt, an ink film is formed. When an ink film forms, the adhesive strength of the glue applied to the belt decreases and the fabric attached to the belt becomes more likely to float. To prevent ink film, clean any pigment ink adhering to the belt. Also, if an ink film has formed on the belt, remove the ink film. Cleaning Ink Stains on the Belt 36 Frequency Everyday, when printing ends User Permissions L Required Number of Workers 1 person Personal Protective Equipment The following is the protective equipment that must be worn when using the ethanol recommended by Epson.
For details, refer to the instructions of the SDS for the ethanol you are actually using. Eye protection (For organic solvent use; Optimal is a goggle-type that seals against your face) Gas mask (For organic solvent use) Protective gloves (Butyl or polyurethane) Protective clothing (Long-sleeved) Hat or hair net (Persons with long hair must be tied together with a hair net also worn) Safety shoes