Name and Function of Each Part Name of Each Part This section describes the name and function of each part including major parts. Front 20 No. Name Description 1 Emergency stop button Stops operation of this machine immediately. 2 Maintenance window for mist filter Use this maintenance window to clean/replace the mist filter. 3 Pause button Printing is paused and the print head stops in the flushing area or the cleaning station area. 4 Ink tank housing This housing contains the sub-tank rack. 5 Flushing area This contains the flushing plate, and the print head performs flushing here.
6 Fabric peeling prevention bar This bar prevents the peeled part of the fabric from floating up when winding the printed fabric in the dryer. Adjust the height of the bar whenever changing the fabric type or thickness. For more information, refer to "Adjusting the Fabric Peeling Prevention Bar" on page 37. If you would like to install a fabric peeling prevention bar, contact qualified service personnel. 7 Water supply valve on the belt cleaning unit This is the valve on the belt cleaning unit that supplies water to the unit. 8 Belt cleaning unit This unit contains the belt cleaning tank for cleaning ink and other foreign material adhering to the belt.