Name and Function of Each Part Rear panel 29 No. Name Description 1 STOP/PAUSE Press this button to pause printing. The head comes to a stop at either the flushing area or the cleaning station. Press the [Start] button on Leonardo to resume printing. 2 Belt feed button (Forward) Press and hold this button to feed the belt in the forward direction. 3 Button (Blue lamp) Press this button to turn ON the feeding unit. (Turn on when enabling slack mode or fabric meandering correction.) 4 Button Press this button to turn OFF the feeding unit.
5 Selection switch (White lamp) Use this switch to turn ON (1) / OFF (0) the functions for detecting slack in fabric that is fed and for communicating with the feeding unit. 6 Selection switch (Black) Use this switch to change the operating direction of the pressure roller. Left: Moves vertically. Right: Moves horizontally. 7 Belt feed button (Reverse) Press and hold this button to feed the belt in the reverse direction. 8 Selection switch Use this switch to fabric meandering correction to AUTO/ MAN (MANUAL). 9 Selection switch Use this switch to move the position of the set fabric left and right. This switch is enabled only when the selection switch in No. 8 is set to MANUAL. SX:
Moves the position to the left. DX: Moves the position to the right. 10 Volume Use this control to adjust the conveyor belt speed while glue is applied.