Print Workflow Set the Foreign Material Detection Sensor Set the foreign material detection sensor. When loading the fabric for the first time or changing the fabric type or thickness, you need to set the sensor. Located at the side of the belt, this measures gaps on the upper side of the fabric with a laser beam. If there is foreign material on the fabric or if the fabric floats upward without pressing against the belt, generating a value that is below the threshold value, printing is stopped to prevent the print head from colliding with the foreign material or fabric. This threshold value is set by the user.
Sensor position Fabric feeding direction Print area Foreign Material Detection Sensor (Measures gaps on fabric and detects foreign material.) 108 CAUTION To prevent print head damage, set appropriately. Sensors are located on the left and right sides of the print head carriage. When foreign material is detected, the machine stops.