EPSON — Print Head Failure

Troubleshooting 3 On the [Color Selection] screen, select the print head for manual flushing. Multiple print heads can be selected. The selected print head changes its display as shown below. 148 4 Click [Continue]. The print head moves over the flushing plate and starts manual flushing. When manual flushing is completed, the print head returns to its original position. 5 Perform a nozzle check to see if there is any ink color mixing. For more information, refer to "Nozzle Check" on page 84. If the nozzle check pattern has mixed colors, perform manual flushing again. Print Head Failure The function described in this section is not installed on EVO TRE 8-180.

If a print head failure occurs, promptly make a request for repairs to be performed. If a print head failure occurs on this machine, you can configure the settings so that only that specific head column is not printed. The other print heads will cover for the head that does not print. This will cause the print speed to drop, but production can continue until the head is repaired. For more information about how to use this function, contact qualified service personnel. 1 Use nozzle check and other functions to identify the print head that has failed. For more information about how to use this function, contact qualified service personnel.