EPSON — Name of Each Part

Name and Function of Each Part Rear 52 No. Name Description 1 Emergency stop button Stops operation of this machine immediately. 2 Rear Protection Covers These are movable covers. Open these covers to perform maintenance. 3 Pause button Printing is paused and the print head stops in the flushing area or the cleaning station area. 4 Fabric tension adjustment panel Use this panel to adjust the winding tension of the fabric. 5 Rear panel Location of the operating panel for performing operations on the rear of the machine. 6 Feeding unit The fabric roll is installed here, and the unit feeds the fabric into the machine. 7 Air supply regulator This regulator supplies compressed air.

8 Fabric edge sensor unit This sensor detects the left edge position of the fabric. 9 Electric box for feeding unit This box supplies power to the feeding unit. 10 Slack sensor This sensor detects slack in the fabric. 11 Electric box for belt heater unit This box supplies power to the belt heater unit. 12 Towel roller This roller makes contact with the belt during printing to wipe water droplets of the belt. 13 Slack adjustment switch In slack mode, the machine feeds out fabric to create slack.