Name and Function of Each Part Control Panel Main electric panel 58 No. Name Description 1 Lamp (White) When this lamp is on, power is supplied to the main circuit. 2 Emergency stop button Stops operation of this machine immediately. 3 Main switch Used to switch on/off the power to the main unit. 4 Reset Press this button after selecting Set Point to start the Set Point operation. 5 Maintenance Used when performing glue application work. CAUTION If the power is turned on while the key is still inserted, the belt operation safety function during printing (device operation) will be disabled, resulting in a dangerous situation.
Therefore, do not insert the key except for when applying glue for maintenance work. The key must be kept by the person authorized by the employer and must never be left inserted in the electrical panel.