EPSON — Turning On the Power

Workflow before Beginning Work Pushing an Emergency Stop Button for an Emergency Stop Push the emergency stop button to put the machine in emergency stop status, so that the print heads and motor do not operate suddenly when the power is turned on. Emergency stop buttons are found in five locations around the machine. Firmly press one of these emergency stop buttons. Turning On the Power Turn on the power. Turn the Main Power Switch on the Main Electric Box to 1 (ON). Confirm that the lamp (white) lights up. Lamp (White) Main power switch Maintenance The red LED on the tower lamp also comes on. 76 CAUTION Confirm that the key is not inserted in Maintenance.

If the power is turned on while the key is still inserted, the belt operation safety function during printing (device operation) will be disabled, resulting in a dangerous situation. Therefore, do not insert the key except for when applying glue for maintenance work. The key used for the maintenance for glue re-application must be in a safe and locked place and under the full responsibility of the person in charge of. Confirm that front protection covers and rear protection covers are closed before turning on the power.