EPSON — Cleaning with Leonardo

Workflow before Beginning Work Head Cleaning Use one of the following procedures to perform head cleaning. • Cleaning with Leonardo (recommended) • Manual cleaning: Refer to the "Maintenance Guide". Cleaning with Leonardo Make the required settings in the [Maintenance] menu to perform cleaning. 1 Click [Maintenance]. 2 Under [Intensity], select the strength of head cleaning. First, perform cleaning in [Normal]. If it does not recover, try cleaning in [Medium]. If it still does not recover, clean in [Extra]. 87 Item Description Normal Use this setting for standard head cleaning. Medium Use this setting if the problem is not resolved on the Normal setting.

A greater amount of ink is used than for the Normal setting. Extra Use this setting if there are bubbles in the ink tube. Because most of the ink in the ink path is discharged, this setting uses a very large volume of ink.