EPSON — Slack Mode

Print Workflow 8 When printing on the inner side of the fabric, turn the slack adjustment switch to the left. When printing on the outer side of the fabric, turn the slack adjustment switch to the right. The spindle for the feeding device will rotate and the fabric will begin to have slack. The following procedures describe how to print on the inner side of the fabric. 9 When the fabric hangs down to the height of the slack sensor, the machine automati- cally stops. The amount of slack is detected by the slack sensor in the rear lower center. If the belt moves and lifts up the fabric causing there to be not enough slack, slack is given to the fabric until the sensor detects the fabric.

Slack sensor Core Slack part of the fabric 99