Please follow the procedures below to set the communications for the robot controller. Connect a monitor, keyboard, and mouse to the robot's control box, and turn on the robot's power. 17 3.1. Setting Communications for Robot controller Click [Get Control] on the robot startup screen to make the settings available. If the robot is in auto mode, switch to manual mode. 1 Click the icon in the top left menu to display a list of the function menu. Click [System] – [Network]. 2 Click [Local Area Connection X] in Network setting. Set the IP Address and Subnet Mask. Set the IP address that does not overlap with the Vision Sensor and the PC where TMflow is running. 3