Atari Games Final Lap — final_lap_2.jpg

Final Lap Self-Test When you turn off the self-test switch, the game returns to the attract mode. When you turn on the selftest switch, the self-test screen appears does not appear this way, then do the following: 1. Check to make sure the gas pedal is returning to top of its mechanical range. If it does not, repair or To move through the options and tests, press both the gas and the brake pedals and change the gear shift from low to high. (You will hear a roar through the speakers when you change the gear shift.) The next option setting now flashes. To move to the next option or test, do the same procedure. replace the gas pedal. 2. Turn the self-test switch off and then on again. 3.

The number should reset to zero. 4. If it does not, check the potentiometer on the gas pedal. You can only move down the screen. When you reach the end of the list, you return to the Sound test. Brake Pedal Test To change a flashing option setting, move the gear shift from low to high. Do not press the gas or brake BRAKE is the brake pedal test. Press the brake pedal, and the number to the right increases. Release the pedal, and the number decreases. If you are not pressing on the brake pedal, the number should be 00. If the number does not appear this way, then do the following: pedal. Every time you move the gear shift, a new setting appears.

Once you choose a new setting, you can return immediately to the attract mode, if you like. RAM Test This tests the game RAMs. If the game RAMs are working correctly, OK appears. If the screen shows any- 1. Check to make sure the brake pedal is returning to top of its mechanical range. If it does not, repair or replace the brake pedal. thing besides OK, a qualified technician should check the game boards. 2. Turn the self-test switch off and then on again. ROM 4, If it does not, check the potentiometer on the brake Test This tests the game working correctly, OK ROMs. If the game appears. ROMs are If the screen shows anything besides OK, a qualified technician should check the game boards.

Gas Pedal Test GAS is the gas pedal test. Press the gas pedal, and the number to the right increases. Release the pedal, and the number decreases. If you are not pressing on the gas pedal, the number should be 00. If the number 3, The number should reset to zero. pedal. Steering Wheel Test STEERING is the steering wheel test. When you turn the wheel to the left, the number increases. When you turn the wheel to the right, the number decreases. If you are not turning the steering wheel, the number should be 00 or FF. If the number does not appear this way, then do the following: 1. Check to make sure the steering wheel returns to the center. If it does not, repair the steering wheel. 2.

Turn the self-test switch off and then on again. 3. The number should reset to zero. 4, If it does not, check the potentiometer on the steering wheel. Sound Test SOUND is the sound test. Cycle through the five sounds to test the audio circuitry. Coin Options The COIN 1 option sets the coin option for each player. The COIN 2 setting does not apply to this game. Figure 2-1 Self-Test Screen 2-2