Final Lap Notice Regarding Non-Atarie Parts WARNING Use of non-Atari parts or modifications of any Atari game circuitry may adversely affect the safety of your game, and may cause injury to you and your players. You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: ¢ Substitute non-Atari parts in the game. * Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation. NOTE This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to SubpartJ of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference, in which case the user, at his own expense, will be required to take whatev- ef measures may be required to correct the interference. If you suspect interference from an Atari game at your location, check the following:
e All ground wires in the game are properly connected as shown in the game wiring diagram. ° The power cord is properly plugged into a grounded three wire outlet. ¢ On games provided with an Electromagnetic Interference (EMD ground plane, be sure the game printed-circuit boards (PCBs) are properly installed on the EMI Ground Plane. If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual for service in your area. iii