gac Empow — 5.5.1 RPA

5. Driving guide CAUTION WARNING ● Always keep the surface of the RPA sensors clean and never cover a RPA sensor. ● The RPA cannot take the place of the driver’s observation to the surrounding environment. The driver shall be concentrated and reverse safely according to the actual conditions. ● Keep the RPA sensors clean and protect them from freezing to ensure they operate properly. ● Clean the RPA sensor surface with a piece of soft damp cloth to avoid scratching. ● There is a blind spot when radar sensor is detecting obstacles. When reversing, the driver must pay attention to observation to avoid accidents. The rear ultrasonic radar sensors are installed on the rear bumper cover.

(for models with vertical grille*) ● When the vehicle is reversing at a narrow place or on an uphill slope, the RPA sensors may not detect railings, trees or slope surfaces, which is normal. ● When the reversing speed is fast, the radar sensor detection accuracy is reduced. It is recommended that the reversing speed should not exceed 10 km/h. When the RPA sends the continuous audible alarms, it indicates that the vehicle is extremely close to the detected obstacle, and reversing shall be stopped immediately to prevent an accident. 257