GENERAL SPECIFICATIONS 1-7 E UROCARGO Euro 4/5 Vehicle delivery 1.11 Vehicle delivery Prior to delivering the vehicle, the body builder shall:
- verify that the work has been made correctly; - perform vehicle and/or equipment set-up; - check the operation and safety of the vehicle and/or equipment; - prepare and deliver the necessary instructions for service and maintenance of the fitting and any additional units to the end custo- mer; - write the new data down on the special tags; - confirm that the work carried out complies with the indications provided by the vehicle manufacturer and with all legal require- ments; - carry out the checks included in the ”IVECO Pre-Delivery inspection” list (available from the IVECO network) with regard to the items affected by the work done; - provide a guarantee for the modifications made; - in the event that the connections originally provided with screws have been mounted and restored, the same screws must not be used.
In such an instance, and in the event that rivets have been replaced with screws, you must again check the tightness of the connection after travelling approximately 500-1000 km, to ensure it is to the correct torque; - measure the battery voltage. Ensure there is a minimum charge of 12.5 V. If the voltage reading is between 12.1 and 12.49 V, recharge the battery (slow charge). If the voltage is less than 12.1 V, the battery must be scrapped and replaced with a new one. Vehicle delivery Print 603.93.431 Base - January 2008