Job Separator Mode G Print jobs are automatically sent one job per bin to the first empty bin beginning with the top bin. Non-empty bins are skipped. If all bins have paper, then the job will be sent to the first non-full bin starting at the top. G If a bin fills during delivery, the system will stop. A control panel message indicates that paper needs to be removed before delivery to that bin can continue. Delivery of the job resumes in the same bin when paper is removed. G To clear a device full condition, empty all bins. Note Use of an overflow bin can cause a job to be mixed in two bins.
Virtual Stacker Mode In Virtual Stacker Mode, printed sheets are stacked face down in the bins from the lowest bin to the top bin, regardless of job boundaries. This mode of operation takes advantage of the total capacity of the mailbox bins. The software sees the mailbox as one logical bin. When the mailbox is full, the system will halt until all bins are emptied. Collator Mode G Mopies of a print job are automatically sent one mopy per bin beginning with the top bin. G If there are more mopies than bins, the delivery resumes sequentially from the top bin until all mopies are delivered. G If a bin fills during delivery, the system will stop.
A control panel message indicates which bin is full, and will display a request to remove paper. Delivery of the mopy resumes in the same bin when paper is removed. G To clear a device full condition, empty all bins. Note Use of an overflow bin can cause a job to be mixed in two bins. 130 Chapter 5 Functional Overview C4085-91087