Feeder Assembly Figure 6-31 Feeder Assembly (1 of 2) 1 Open the left access door and remove the Duplexer (if installed). 2 Remove the Fusing Assembly (see figure 6-34 on page 198). 3 Open the Top Cover and remove the Toner Cartridge. 4 Remove the Transfer Roller Assembly (see figure 6-60 on page 228). 5 Remove the Registration Assembly (see figure 6-51 on page 217). 6 Unplug the sensor cable at the right side of the Feeder Assembly (figure 6-31, callout 1). 7 Remove 2 screws at the front of the Feeder Assembly (figure 6-31, callout 2). 194 Chapter 6 Removal and Replacement C4085-91087