Fusing Assembly Figure 6-34 Fusing Assembly 1 Open the Diverter Assembly access door, and remove the Duplexer if installed. CAUTION Use the upper levers to release the Fusing Assembly, NOT the lower levers. The lower levers set the pressure rollers inside the Fusing Assembly for envelope printing (down for single sheets, up for envelopes). 2 To release the Fusing Assembly rotate the upper levers down (figure 6-34, callout 1). 3 To remove the Fusing Assembly lift up on the finger handles (figure 6-34, callout 2) while pulling outward. 198 Chapter 6 Removal and Replacement C4085-91087