Transfer Roller Assembly Figure 6-60 Transfer Roller Assembly CAUTION Handle the Transfer Roller from the ends only. Do not touch the surface of the Transfer Roller. Skin oils will affect its electrical characteristics, resulting in poor image transfer. 1 Open the top cover door, and remove the toner cartridge. 2 Grasp the gear (figure 6-60, callout 1) on the left end, and carefully lift upward just enough to clear the retainer clip. 3 Slide the Transfer Roller Assembly to the left to release the shaft on the right end (figure 6-60, callout 2). 228 Chapter 6 Removal and Replacement C4085-91087