Main Cable Harness 1 Remove the Back Cover from the 2000-sheet Input Tray (see figure 6-63). 2 Locate and disconnect the 6 cable connectors that connect the Main Cable Harness to the Controller PCA on the 2000-sheet Input Tray (figure 6-68, callout 1). 3 Locate and disconnect the 5 cable connectors that connect the Main Cable Harness to the unit’s chassis (callout 2). 4 Release the cable harness from the 4 cable clips that hold the harness to the unit’s chassis (callout 3). To Reinstall: 1 Properly replace all 11 cable harness connectors (callouts 1 and 2). 2 Reattach the harness to the 4 cable clips that hold the harness to the unit’s chassis (callout 3).
240 Chapter 6 Removal and Replacement C4085-91087