Front LED PCA Assembly 1 Open the paper tray on the 2000-sheet Input Tray halfway to the stops. 2 On the upper-left corner of the front of the unit’s chassis, locate and remove the 1 screw that secures the LED PCA Assembly to the chassis (figure 6-70, callout 1). 3 Reach behind the LED PCA Assembly and pull it away from the chassis. 4 To remove the LED PCA from the cable connector, release the 3 plastic retaining tabs that secure the LED PCA to the connector (figure 6-70, callout 2). 5 Pull the LED PCA from the connector. To Reinstall: 1 Reconnect the LED PCA to the connector (callout 2). 244 Chapter 6 Removal and Replacement C4085-91087