Figure 6-169 8-bin Mailbox Delivery Head Assembly (3 of 4) 6 On the back side of the 8-bin Mailbox, release the flat ribbon cable from the cable clip that secures the cable to the 8-bin Mailbox frame (Figure 6-169, callout 4), and gently disconnect the flat ribbon cable from the Delivery Head Assembly (callout 5). 7 Raise the Delivery Head Assembly to the top of the 8-bin Mailbox frame. 8 Hold up the Delivery Head Assembly, and remove the 2 screws that secure it to the elevator mounts: 1 screw on each end of the assembly (Figure 6-167, callout 6). The screw that secures the back end is captive. 352 Chapter 6 Removal and Replacement C4085-91087